Henny Penny LVE-102 Operation Manual page 32

3-13. MAINTENANCE
FILTER (Continued)
Closed
Figure 3 (Fish Vats)
Aug. 2009
8. Use the scouring tool, a nylon scouring pad, and a small amount of McD
Fryer Cleanser to scrub the inside of the vat. Be careful not to damage the
sensing probes.
Do not use steel wool, other abrasive cleaners or cleaners/ sanitizers
containing chlorine, bromine, iodine or ammonia chemicals, as these will
deteriorate the stainless steel material and shorten the life of the unit.
Do not use a water jet (pressure sprayer) to clean the unit, or component
damage could result.
9. Once the vat is clean and the display shows "SCRUB VAT COMPLETE?"
"YES NO". Press
VAT" "YES NO".
10. Lower the element and then press
"WASHING". The oil circulates through the vat for several minutes. Once
the wash cycle is complete, display shows "WASH AGAIN?" "YES NO".
11. Press
button for NO and the display shows RINSING and fryer automatically
rinses the vat. When rinsing is complete, display shows "RINSE AGAIN?"
"YES NO".
12. Press
button for NO. The display shows "POLISH?" "YES".
13. Press
�����������������������
button for STOP to stop the polishing, otherwise the oil is polished for 5
minutes.
Open
14. Once the oil is polished, the display shows "FILL VAT?" "YES". Press
ü
�����������������������������
��������������������������������
Open the door and turn the drain handle from the vertical position to the
horizontal position to close the vat drain valve. Figure 3
15. Once full, the display shows "IS POT FILLED?" "YES NO". Press
button for YES and fryer returns to normal operation.
If X button is pressed, the display shows "FILLING" and once the pump
stops, the controls show "CHANGE FILTER P�������������
pad may be clogged.
ü
button for YES and the display shows "WASH
ü
button for YES if another wash is needed, otherwise press X
ü
button for YES if another rinse is needed, otherwise press X
ü
button for YES, the oil is "polished" by circulating it through the
3-15
Model LVE-102, 103, 104
ü
button and display shows
OP".If desired, press
ü
h oil.
ü