Troubleshooting; Troubleshooting Guide - Henny Penny LVE-102 Operation Manual

6-1. TROUBLE SHOOTING GUIDE
Problem
POWER switch
ON but fryer
completely
inoperative
Oil will not heat
but lights are on
No Heat error
"E-22"
Control error code
"E-10"
Vat is under���
July 2010
SECTION 6. TROUBLESHOOTING
Cause
• Open circuit
• All power cords not
plugged-in
• Open high limit circuit
• JIB is low or empty
• JIB oil line is clogged
or collapsed
• Filter pan needs cleaned
Correction
• Plug fryer in
• Check breaker or fuse at supply box
• (Non-US/some Int'l. locations only)
Breakers in fryer tripped-open left door and
reset breaker on fryer; See below
• Unit has 2 power cords; make sure both are
plugged-in; have heat circuit checked
• Let unit cool (15-20 min.), reset high limit using
small screwdriver or Allen wrench, by gently
pushing it into heating element hinge hole; if high
limit does not reset, high limit must be replaced
• Fill the JIB
• Check JIB line
• ��������������������
6-1
Model LVE-102, 103, 104