Henny Penny LVE-102 Operation Manual page 47

4-3. DEEP CLEAN MODE
(Continued)
Oct. 2018
10. Follow McDonald's vat cleaning procedure and at the end of the one
hour, display shows "CLEAN DONE" and beeps. Press
button and display then shows "REMOVE SOLUTION FROM VAT".
11. Empty filter drain pan of internal filtering components and take the
components to a sink to be cleaned. Return the empty filter drain pan
and cover to the fryer.
12. Using a 1/2 gal. (2 liter) pitcher, remove the solution from the vat,
pouring it into a heat-resistant bucket for disposal. Any remaining
solution can be drained into the drain pan for disposal, in step 14
ü
below. Press button and display shows "VAT EMTY" "YES NO".
To avoid burns when pouring hot solution, wear gloves and
protective gear and take care to avoid splashing.
13. Once vat is empty, press
COMPLETE" "YES NO". Use brush to clean element and scour pad
to clean vat, if needed.
Do not scrape the electric fryer elements, or use the scouring pad
on the elements. This produces scratches on the surface of the
element causing breading to stick and burn.
Do not use steel wool, other abrasive cleaners, or cleaners/
sanitizers containing chlorine, bromine, iodine, or ammonia
chemicals as these will deteriorate the stainless steel material and
shorten the life of the unit.
Do not use a water jet (pressure sprayer) to clean unit or
component damage could result. Make sure the inside of the vat,
the drain valve opening, and all the parts that will come in contact
with the new oil are as dry as possible.
Do not exert pressure on the heating elements or fire may
occur, resulting in personal injury and/or property damage.
Use the lift tool and lift the hinged element from the vat as needed.
14. Once vat is clean, press the
VAT" and the drain opens.
4-6
Model LVE-102, 103, 104
ü
button and display shows "SCRUB VAT
FIRE RISK
ü
button and display shows "RINSE
ü