Adding A Card For The User - Bosch D9412GV4 Quick Reference Manual

Control Panel
Adding a keyfob
1.
2.
3.
4.
5.
6.
8.6

Adding a Card for the User

1.
2.
3.
4.
5.
Notice!
You can add a keyfob, transmitter, or card to an existing user by selecting the Edit User menu
instead of the Add User menu.
Bosch Security Systems, Inc.
Press [Add] softkey to add a RADION keyfob or an Invonics Transmitter.
Press [Add] softkey to continue.
On a RADION keyfob, press any button. On an Inovonics Transmitter, open the
transmitter and press the RESET button, per the manufacturer's instructions. The keypad
shows Keyfob enrolled.
If you need to replace the keyfob or transmitter you just added (for example, you
accidentally added the wrong one), press [Replace] softkey and then [Replace] softkey,
and follow the previous step.
You can remove the added keyfob or transmitter by pressing [Remove] softkey.
Press [ESC] to exit the menu.
Press [Card] softkey to assign a card to the user.
Press [Enter] softkey to continue.
Present the card at the card reader and wait for the tone.
If the reader identifies the card correctly, a tone sounds and the keypad shows Card
configured.
Press [ESC] to exit the menu.
Quick Reference Guide
Add System Users Locally With a Keypad | en
2014.05 | 05 | F.01U.265.463
21