Programming The Control Panel For Common Reporting Options; Set Up Daily Test Report Using Rps; Set Up Open And Close Reports Using Rps; Area Wide Parameters - Bosch D9412GV4 Quick Reference Manual

16 en | Programming the Control Panel for Common Reporting Options
6 Programming the Control Panel for Common Reporting
Options
6.1

Set Up Daily Test Report Using RPS

1.
2.
3.
4.
5.
6.
7.
8.
6.2

Set Up Open and Close Reports Using RPS

6.2.1

Area Wide Parameters

To report each area independently:
–
–
To report by account (Close signal is sent when the last area in an account is armed; Open
signal is sent when the first area is disarmed):
–
–
Notice!
If you want Perimeter Open and Close, select Perimeter O/C = YES.
6.2.2

Set Authority Level

1.
2.
3.
4.
5.
2014.05 | 05 | F.01U.265.463
Go to SCHEDULES→Skeds.
Enter Function Code 9 (Test Report) in an unused Sked.
Select NO for the Deferred parameter to send test reports regardless of other test
reports sending between scheduled test reports.
Select NO for the Hourly parameter to send test reports only when the sked executes and
not every hour.
Enter the time at which you wish the schedule to send the report.
Leave the Date parameter disabled so that the sked executes by days of the week instead
of only on a selected date.
Select YES for each day of the week.
Select NO for:
– Except On Holiday
– Holidays 1 - 4
Go to AREA WIDE PARAMETERS→Area/Bell,Open/Close Options→Acct Open/Close in
RPS. Select NO (default).
Go to Area Open/Close in RPS). Select YES (default).
Go to AREA WIDE PARAMETERS→Area/Bell,Open/Close Options→Acct Open/Close in
RPS. Select YES.
Go to Area Open/Close in RPS. Select NO.
Go to USER INTERFACE→Authority Levels.
Go to the Authority Level to be used by users sending Open and Close reports.
Select E (enabled) for Area Open/Close.
Select E for Restricted Open/Close.
Select E for Perimeter Open/Close.
Quick Reference Guide
Control Panel
Bosch Security Systems, Inc.