Adding Remote Radio User Codes; Deleting User/Radio Codes - Bosch Solution 2000 Installation Manual

Control Panel
7.2.4

Adding Remote Radio User Codes

This function allows a Master Code holder to add a remote radio User Code ( RF keyfob).
To Add a WE800EV2 Keyfob
Set RF receiver as WE800EV2 Receiver. Confirm that the keyfob has been added to the
WE800EV2 receiver. Refer to WE800EV2 receiver, page 18 – Add/delete keyfobs.
1.
2.
3.
4.
To Add a RADION keyfob
Set RF receiver as RADION Receiver.
1.
2.
3.
4.
7.2.5

Deleting User/Radio Codes

Only the Master Code holder can delete other system user codes.
To Delete a User Code
1.
2.
3.
4.
To Delete a WE800EV2 Keyfob
1.
2.
3.
To Delete a RADION Keyfob
1.
Bosch Security Systems, Inc.
Enter your Master Code, followed by [1] and the [#] button (for example, [25801#]).
Enter the WE800EV2 keyfob number (301 to 332) you want to add, followed by the [#]
button. Up to 21 WE800EV2 keyfobs can be added, but only current keyfob number (1 to
16 ) displays through zone indicators on the ICON codepad.
Only use auto-learn mode to configure keyfob RFID. Press [*] button to switch into auto-
learn mode. When icon numbers (1 to 16) flash, press button 1 or 2 of the keyfob. The
control panel learns the WE800EV2 keyfob ID number and the last digit of RFID number
displays on the codepad. Press [#] button to confirm.
Enter [#] button to confirm the operation, or press [*] to cancel.
Enter your Master Code, followed by [1] and the [#] button (for example, [25801#]).
Enter the RADION keyfob number (301 to 332) you want to add, followed by the [#]
button. Up to 32 RADION keyfobs can be added, but only current keyfob number (1 to
16 ) displays through zone indicators on the ICON codepad.
Use manual mode or auto-learn mode to configure the RADION keyfob RFID.
– In manual mode, enter the 9-digit RF device ID number followed by [#], or press [*]
to switch into auto-learn mode. When icon numbers (1 to 16) flash, press the 1 or 2
button on the keyfob. The control panel learns the RADION keyfob ID number and
the last digit of RFID number displays on the codepad. Press [#] to confirm.
Press [#] to confirm the operation, or press [*] to cancel.
Enter your Master Code, followed by [1] and the [#] button (for example,
[25801#]).Three beeps sound and the STAY and AWAY indicators flash.
Enter the user code number (1 to 32), followed by the [#] button (for example, [2#] =
User 2, [16#] = User 16). Two beeps sound and the selected user number displays on the
codepad indicators.
Press the [*] button to delete the selected User Code. Two beeps are heard and the STAY
and AWAY indicators turn off.
To delete other User Codes, repeat this procedure as many times as required.
Enter your Master Code, followed by [1] and the [#] button.
Enter the WE800EV2 keyfob number (301 to 332) you want to delete, followed by the [#]
button.
Press the [*] button to delete the WE800EV2 Keyfob.
Enter your Master Code, followed by [1] and the [#] button.
Installation Guide
System Functions | en 53
2017.10 | 03 | F.01U.298.026