Mac Filter; Wireless Lan Advanced Screen; Figure 40 Network > Wireless Lan > Mac Filter; Table 32 Network > Wireless Lan > Mac Filter - ZyXEL Communications ZyXEL NBG334W User Manual

Chapter 5 Wireless LAN

5.6 MAC Filter

The MAC filter screen allows you to configure the NBG334W to give exclusive access to up
to 32 devices (Allow) or exclude up to 32 devices from accessing the NBG334W (Deny).
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address
is assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02. You need to know the MAC address of the devices to configure this
screen.
To change your NBG334W's MAC filter settings, click Network > Wireless LAN > MAC
Filter. The screen appears as shown.
Figure 40 Network > Wireless LAN > MAC Filter
The following table describes the labels in this menu.
Table 32 Network > Wireless LAN > MAC Filter
LABEL
Active
Filter Action
Set
MAC
Address
Apply
Reset

5.7 Wireless LAN Advanced Screen

Click Network > Wireless LAN > Advanced. The screen appears as shown.
86
DESCRIPTION
Select Yes from the drop down list box to enable MAC address filtering.
Define the filter action for the list of MAC addresses in the MAC Address table.
Select Deny to block access to the NBG334W, MAC addresses not listed will be
allowed to access the NBG334W
Select Allow to permit access to the NBG334W, MAC addresses not listed will be
denied access to the NBG334W.
This is the index number of the MAC address.
Enter the MAC addresses of the wireless station that are allowed or denied access to
the NBG334W in these address fields. Enter the MAC addresses in a valid MAC
address format, that is, six hexadecimal character pairs, for example,
12:34:56:78:9a:bc.
Click Apply to save your changes back to the NBG334W.
Click Reset to reload the previous configuration for this screen.
NBG334W User's Guide