ZyXEL Communications ZyXEL NBG334W User Manual page 232

Appendix A Product Specifications and Wall-Mounting Instructions
Table 103 Standards Supported (continued)
STANDARD
RFC 1631
RFC 1723
RFC 2236
RFC 2516
RFC 2766
IEEE 802.11
IEEE 802.11b
IEEE 802.11g
IEEE 802.11d
IEEE 802.11x
IEEE 802.11e QoS
Microsoft PPTP
MBM v2
Wall-mounting Instructions
Do the following to hang your NBG334W on a wall.
See the
apart to place them.
1 Locate a high position on a wall that is free of obstructions. Use a sturdy wall.
2 Drill two holes for the screws. Make sure the distance between the centers of the holes
matches what is listed in the product specifications appendix.
Be careful to avoid damaging pipes or cables located inside the wall when
drilling holes for the screws.
3 Do not screw the screws all the way into the wall. Leave a small gap of about 0.5 cm
between the heads of the screws and the wall.
232
DESCRIPTION
IP Network Address Translator (NAT)
RIP-2 (Routing Information Protocol)
Internet Group Management Protocol, Version 2.
A Method for Transmitting PPP Over Ethernet (PPPoE)
Network Address Translation - Protocol
Also known by the brand Wi-Fi, denotes a set of Wireless LAN/WLAN
standards developed by working group 11 of the IEEE LAN/MAN
Standards Committee (IEEE 802).
Uses the 2.4 gigahertz (GHz) band
Uses the 2.4 gigahertz (GHz) band
Standard for Local and Metropolitan Area Networks: Media Access
Control (MAC) Bridges
Port Based Network Access Control.
IEEE 802.11 e Wireless LAN for Quality of Service
MS PPTP (Microsoft's implementation of Point to Point Tunneling
Protocol)
Media Bandwidth Management v2
Figure 133 on page 233 for the size of screws to use and how far
NBG334W User's Guide