Introducing The Web Configurator; Web Configurator Overview; Accessing The Web Configurator - ZyXEL Communications ZyXEL NBG334W User Manual

C
H A P T E R
This chapter describes how to access the NBG334W web configurator and provides an
overview of its screens.

2.1 Web Configurator Overview

The web configurator is an HTML-based management interface that allows easy setup and
management of the NBG334W via Internet browser. Use Internet Explorer 6.0 and later or
Netscape Navigator 7.0 and later versions or Safari 2.0 or later versions. The recommended
screen resolution is 1024 by 768 pixels.
In order to use the web configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled by
default in Windows XP SP (Service Pack) 2.
• JavaScripts (enabled by default).
• Java permissions (enabled by default).
Refer to the Troubleshooting chapter to see how to make sure these functions are allowed in
Internet Explorer.

2.2 Accessing the Web Configurator

1 Make sure your NBG334W hardware is properly connected and prepare your computer
or computer network to connect to the NBG334W (refer to the Quick Start Guide).
2 Launch your web browser.
3 Type "http://192.168.1.1" as the website address.
Your computer must be in the same subnet in order to access this website address.
• In Router Mode enable the DHCP Server. The NBG334W assigns your computer an IP
address on the same subnet.
• In AP Mode the NBG334W does not assign an IP address to your computer, so you
should check it's in the same subnet. See
NBG334W User's Guide
Introducing the Web
Configurator
Section 4.5 on page 68
2
for more information.
35