Table 39 Network > Wan > Internet Connection: Pptp Encapsulation - ZyXEL Communications ZyXEL NBG334W User Manual

Chapter 7 WAN
The following table describes the labels in this screen.
Table 39 Network > WAN > Internet Connection: PPTP Encapsulation
LABEL
ISP Parameters for Internet Access
Encapsulation
User Name
Password
Retype to Confirm
Nailed-up Connection
Idle Timeout
PPTP Configuration
Get automatically from
ISP
Use Fixed IP Address
My IP Address
My IP Subnet
Mask
Server IP Address
Connection ID/
Name
WAN IP Address Assignment
Get automatically from
ISP
Use Fixed IP Address
My WAN IP
Address
Remote IP
Address
Remote IP Subnet
Mask
DNS Servers
108
DESCRIPTION
Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables
secure transfer of data from a remote client to a private server, creating a
Virtual Private Network (VPN) using TCP/IP-based networks. PPTP supports
on-demand, multi-protocol, and virtual private networking over public
networks, such as the Internet. The NBG334W supports only one PPTP
server connection at any given time.
To configure a PPTP client, you must configure the User Name and
Password fields for a PPP connection and the PPTP parameters for a PPTP
connection.
Type the user name given to you by your ISP.
Type the password associated with the User Name above.
Type your password again to make sure that you have entered is correctly.
Select Nailed-Up Connection if you do not want the connection to time out.
This value specifies the time in seconds that elapses before the NBG334W
automatically disconnects from the PPTP server.
Select this option If your ISP did not assign you a fixed IP address. This is the
default selection.
Select this option If the ISP assigned a fixed IP address.
Type the (static) IP address assigned to you by your ISP.
Your NBG334W will automatically calculate the subnet mask based on the IP
address that you assign. Unless you are implementing subnetting, use the
subnet mask computed by the NBG334W.
Type the IP address of the PPTP server.
Type your identification name for the PPTP server.
Select this option If your ISP did not assign you a fixed IP address. This is the
default selection.
Select this option If the ISP assigned a fixed IP address.
Enter your WAN IP address in this field if you selected Use Fixed IP
Address.
Enter the remote IP address (if your ISP gave you one) in this field.
Enter the remote IP subnet mask in this field.
NBG334W User's Guide