Chapter 3 Connection Wizard
Table 11 Wizard Step 2: Basic (WEP) Security
LABEL
Next
Exit
3.3.2 Extend (WPA-PSK or WPA2-PSK) Security
Choose Extend (WPA-PSK) or Extend (WPA2-PSK) security in the Wireless LAN setup
screen to set up a Pre-Shared Key.
Figure 17 Wizard Step 2: Extend (WPA-PSK or WPA2-PSK) Security
The following table describes the labels in this screen.
Table 12 Wizard Step 2: Extend (WPA-PSK or WPA2-PSK) Security
LABEL
Pre-Shared
Key
Back
Next
Exit
3.4 Connection Wizard: STEP 3: Internet Configuration
The NBG334W offers three Internet connection types. They are Ethernet, PPP over
Ethernet or PPTP. The wizard attempts to detect which WAN connection type you are using.
If the wizard does not detect a connection type, you must select one from the drop-down list
box. Check with your ISP to make sure you use the correct type.
This wizard screen varies according to the connection type that you select.
52
DESCRIPTION
Click Next to proceed to the next screen.
Click Exit to close the wizard screen without saving.
DESCRIPTION
Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure
wireless connection by configuring WPA in the wireless LAN screens. You need to
configure an authentication server to do this.
Click Back to display the previous screen.
Click Next to proceed to the next screen.
Click Exit to close the wizard screen without saving.
NBG334W User's Guide