Table of Contents
Advertisement
10.4 MAC Filte r Sc re e n
The MAC filter screen allows you to give exclusive access to devices (
accessing the NBG7815 (
address. The MAC address is assigned at the factory and consists of six pairs of hexadecimal characters,
for example, 00:A0:C5:00:00:02. You need to know the MAC address of the devices to configure this
screen.
Use this screen to change your NBG7815's MAC filter settings. Click
following screen.
Settings > WiFi > MAC Filter
Fig ure 59
The following table describes the labels in this screen.
Table 34 Settings > WiFi > MAC Filter
L ABEL
MAC Filter
Filter Action
MAC Address List (Max Limit : 64)
Add
Apply
Cancel
Chapter 10 Wireless LAN
). Every Ethernet device has a unique MAC (Media Access Control)
De ny
DESC RIPT IO N
Select to turn on (
) or off (
Ena b le
Define the filter action for the list of MAC addresses in the
Select
to permit access to the NBG7815. MAC addresses not listed will be denied access to
Allo w
the NBG7815.
Select
to block access to the NBG7815. MAC addresses not listed will be allowed to access
De ny
the NBG7815.
This field displays the MAC address of the wireless station you want to filter.
Click
to configure the MAC address.
Click
to delete the MAC address.
Click
to add a rule in the
Click
to save your changes back to the NBG7815.
Apply
Click
to reload the previous configuration for this screen.
C a nc e l
NBG7815 User's Guide
) MAC address filtering.
Disa b le
.
MAC Addre ss L ist
112
) or exclude devices from
Allo w
>
>
Se tting s
WiFi
MAC Filte r
table.
MAC Filte r Sum m a ry
to show
Advertisement
Table of Contents
