Domain Name; Connection Wizard: Step 2: Wireless Lan; Figure 14 Wizard Step 1: System Information; Table 9 Wizard Step 1: System Information - ZyXEL Communications ZyXEL NBG334W User Manual

3.2.2 Domain Name

The Domain Name entry is what is propagated to the DHCP clients on the LAN. If you leave
this blank, the domain name obtained by DHCP from the ISP is used. While you must enter
the host name (System Name) on each individual computer, the domain name can be assigned
from the NBG334W via DHCP.
Click Next to configure the NBG334W for Internet access.

Figure 14 Wizard Step 1: System Information

The following table describes the labels in this screen.

Table 9 Wizard Step 1: System Information

LABEL
System Name
Domain Name
Back
Next
Exit

3.3 Connection Wizard: STEP 2: Wireless LAN

Set up your wireless LAN using the following screen.
NBG334W User's Guide
DESCRIPTION
System Name is a unique name to identify the NBG334W in an Ethernet network.
Enter a descriptive name. This name can be up to 30 alphanumeric characters long.
Spaces are not allowed, but dashes "-" and underscores "_" are accepted.
Type the domain name (if you know it) here. If you leave this field blank, the ISP may
assign a domain name via DHCP. The domain name entered by you is given priority
over the ISP assigned domain name.
Click Back to display the previous screen.
Click Next to proceed to the next screen.
Click Exit to close the wizard screen without saving.
Chapter 3 Connection Wizard
49