Bandwidth Management General Configuration; Bandwidth Management Advanced Configuration; Figure 88 Management > Bandwidth Mgmt > General; Table 66 Management > Bandwidth Mgmt > General - ZyXEL Communications ZyXEL NBG334W User Manual

Table 65 Bandwidth Management Priority with Default Classes
CLASS TYPE
AutoClass_M
User-defined with low priority
Default Class

16.8 Bandwidth Management General Configuration

Click Management > Bandwidth MGMT to open the bandwidth management General
screen.
Figure 88 Management > Bandwidth MGMT > General
The following table describes the labels in this screen.
Table 66 Management > Bandwidth MGMT > General
LABEL
Enable Bandwidth
Management
Enable Automatic
Traffic Classifier
Apply
Reset

16.9 Bandwidth Management Advanced Configuration

Click Management > Bandwidth MGMT > Advanced to open the bandwidth management
Advanced screen.
NBG334W User's Guide
PRIORITY
3
2
1
DESCRIPTION
Select this check box to have the NBG334W apply bandwidth management.
Enable bandwidth management to give traffic that matches a bandwidth rule
priority over traffic that does not match a bandwidth rule.
Enabling bandwidth management also allows you to control the maximum or
minimum amounts of bandwidth that can be used by traffic that matches a
bandwidth rule.
This field is only applicable when you select the Enable Bandwidth
Management check box.
Select this check box to have the NBG334W base on the default bandwidth
classes to apply bandwidth management. Real-time packets, such as VoIP traffic
always get higher priority.
Click Apply to save your customized settings.
Click Reset to begin configuring this screen afresh.
Chapter 16 Bandwidth Management
165