Chapter 8 LAN
8.3 LAN IP Screen
Use this screen to change your basic LAN settings. Click Network > LAN.
Figure 60 Network > LAN > IP
The following table describes the labels in this screen.
Table 41 Network > LAN > IP
LABEL
LAN TCP/IP
IP Address
IP Subnet Mask
Apply
Reset
8.4 LAN IP Alias
IP alias allows you to partition a physical network into different logical networks over the
same Ethernet interface. The NBG334W supports three logical LAN interfaces via its single
physical Ethernet interface with the NBG334W itself as the gateway for each LAN network.
To change your NBG334W's IP alias settings, click Network > LAN > IP Alias. The screen
appears as shown.
114
DESCRIPTION
Type the IP address of your NBG334W in dotted decimal notation 192.168.1.1
(factory default).
The subnet mask specifies the network number portion of an IP address. Your
NBG334W will automatically calculate the subnet mask based on the IP address
that you assign. Unless you are implementing subnetting, use the subnet mask
computed by the NBG334W.
Click Apply to save your changes back to the NBG334W.
Click Reset to begin configuring this screen afresh.
NBG334W User's Guide