Table 91 Acl Setting Notes; Table 92 Icmp Notes - ZyXEL Communications ZyXEL NBG334W User Manual

Chapter 20 Logs
Table 90 802.1X Logs (continued)
LOG MESSAGE
Local User Database does not
support authentication method.
No response from RADIUS. Pls
check RADIUS Server.
Use Local User Database to
authenticate user.
Use RADIUS to authenticate user. The RADIUS server is operating as the authentication
No Server to authenticate user.
Local User Database does not
find user`s credential.

Table 91 ACL Setting Notes

PACKET DIRECTION
(L to W)
(W to L)
(L to L/P)
(W to W/P)

Table 92 ICMP Notes

TYPE
0
3
4
5
204
DIRECTION
LAN to WAN
WAN to LAN
LAN to LAN/
NBG334W
WAN to WAN/
NBG334W
CODE DESCRIPTION
Echo Reply
Echo reply message
0
Destination Unreachable
Net unreachable
0
Host unreachable
1
Protocol unreachable
2
Port unreachable
3
A packet that needed fragmentation was dropped because it was set to Don't
4
Fragment (DF)
Source route failed
5
Source Quench
A gateway may discard internet datagrams if it does not have the buffer space
0
needed to queue the datagrams for output to the next network on the route to
the destination network.
Redirect
Redirect datagrams for the Network
0
Redirect datagrams for the Host
1
DESCRIPTION
A user tried to use an authentication method that the
local user database does not support (it only supports
EAP-MD5).
There is no response message from the RADIUS server,
please check the RADIUS server.
The local user database is operating as the
authentication server.
server.
There is no authentication server to authenticate a user.
A user was not authenticated by the local user database
because the user is not listed in the local user database.
DESCRIPTION
ACL set for packets traveling from the LAN to the WAN.
ACL set for packets traveling from the WAN to the LAN.
ACL set for packets traveling from the LAN to the LAN or
the NBG334W.
ACL set for packets traveling from the WAN to the WAN
or the NBG334W.
NBG334W User's Guide