Table of Contents
Advertisement
13.1 Overview
This chapter discusses MAC address filtering.
You can configure the LTE Device to permit access to clients based on their MAC addresses in the
MAC Filter screen. This applies to wired and wireless connections.
13.1.1 What You Need to Know
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is
assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02. You need to know the MAC address of the devices to configure this screen.
13.2 The MAC Filter Screen
Use the MAC Filter screen to allow wireless and LAN clients access to the LTE Device. To change
your LTE Device's MAC filter settings, click Security > MAC Filter. The screen appears as shown.
Figure 91 Security > MAC Filter
LTE-5121 User's Guide
C
HAPTER
1 3
MAC Filter
133
Advertisement
Table of Contents
