C
H A P T E R
This chapter discusses how to configure settings while your NBG334W is set to AP Mode.
Many screens that are available in Router Mode are not available in AP Mode.
See
Chapter 6 on page 93
AP mode.
4.1 AP Mode Overview
Use your NBG334W as an AP if you already have a router or gateway on your network. In this
mode your device bridges a wired network (LAN) and wireless LAN (WLAN) in the same
subnet. See the figure below for an example.
Figure 28 Wireless Internet Access in AP Mode
4.2 Setting your NBG334W to AP Mode
1 Log into the web configurator if you haven't already. See the Quick start Guide for
instructions on how to do this.
2 To set your NBG334W to AP Mode, go to Maintenance > Sys OP Mode > General
and select Access Point.
NBG334W User's Guide
for an example of setting up a wireless network in
4
AP Mode
63