Summary: Wireless Station Status; Figure 10 Summary: Wireless Association List; Table 7 Summary: Packet Statistics - ZyXEL Communications ZyXEL NBG334W User Manual

The following table describes the labels in this screen.

Table 7 Summary: Packet Statistics

LABEL
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
System Up Time
Poll Interval(s)
Set Interval
Stop

2.5.6 Summary: Wireless Station Status

Click the WLAN Station Status (Details...) hyperlink in the Status screen. View the wireless
stations that are currently associated to the NBG334W in the WLAN Association List and
Guest WLAN Association List sections. Association means that a wireless client (for
example, your network or computer with a wireless network card) has connected successfully
to the AP (or wireless router) using the same SSID, channel and security settings.

Figure 10 Summary: Wireless Association List

NBG334W User's Guide
DESCRIPTION
This is the NBG334W's port type.
For the LAN ports, this displays the port speed and duplex setting or Down
when the line is disconnected.
For the WAN port, it displays the port speed and duplex setting if you're using
Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call)
and Drop (dropping a call) if you're using PPPoE or PPTP encapsulation. This
field displays Down when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is
enabled and Down when the WLAN is disabled.
This is the number of transmitted packets on this port.
This is the number of received packets on this port.
This is the number of collisions on this port.
This displays the transmission speed in bytes per second on this port.
This displays the reception speed in bytes per second on this port.
This is the total amount of time the line has been up.
This is the total time the NBG334W has been on.
Enter the time interval for refreshing statistics in this field.
Click this button to apply the new poll interval you entered in the Poll Interval(s)
field.
Click Stop to stop refreshing statistics.
Chapter 2 Introducing the Web Configurator
45