Figure 35 Network > Wireless Lan > General; Table 27 Network > Wireless Lan > General - ZyXEL Communications ZyXEL NBG334W User Manual

Chapter 5 Wireless LAN
Figure 35 Network > Wireless LAN > General
The following table describes the general wireless LAN labels in this screen.
Table 27 Network > Wireless LAN > General
LABEL
Enable
Wireless LAN
Name(SSID)
Hide SSID
Channel
Selection
Operating
Channel
Security Mode
Apply
Reset
See the rest of this chapter for information on the other labels in this screen.
80
DESCRIPTION
Click the check box to activate wireless LAN.
(Service Set IDentity) The SSID identifies the Service Set with which a wireless
station is associated. Wireless stations associating to the access point (AP) must
have the same SSID. Enter a descriptive name (up to 32 printable 7-bit ASCII
characters) for the wireless LAN.
Select this check box to hide the SSID in the outgoing beacon frame so a station
cannot obtain the SSID through scanning using a site survey tool.
Set the operating frequency/channel depending on your particular region.
Select a channel from the drop-down list box. The options vary depending on
whether you are using A or B/G frequency band and the country you are in.
Refer to the Connection Wizard chapter for more information on channels.
This displays the channel the NBG334W is currently using.
Select Static-WEP, WPA-PSK, WPA, WPA2-PSK, or WPA2 to add security on this
wireless network. The wireless clients which want to associate to this network must
have same wireless security settings as this device. After you select to use a
security, addional options appears in this screen. See 5.5.2, 5.5.3,
you can select No Security to allow any client to associate this network without
authentication.
Note: If you enable the WPS function, only No Security, WPA-PSK
and WPA2-PSK are available in this option.
Click Apply to save your changes back to the NBG334W.
Click Reset to reload the previous configuration for this screen.
5.5.4 sections. Or
NBG334W User's Guide