Guest Wlan Ip Screen; Figure 65 Network > Guest Wlan > Mac Filter; Table 45 Network > Guest Wlan > Mac Filter - ZyXEL Communications ZyXEL NBG334W User Manual

To change your NBG334W's MAC filter settings for guest wireless network, click Network >
Guest WLAN > MAC Filter. The screen appears as shown.
Figure 65 Network > Guest WLAN > MAC Filter
The following table describes the labels in this menu.
Table 45 Network > Guest WLAN > MAC Filter
LABEL
Active
Filter Action
Set
MAC
Address
Apply
Reset

9.3 Guest WLAN IP Screen

Click Network > Guest WLAN > IP. The screen appears as shown.
NBG334W User's Guide
DESCRIPTION
Select the check box to enable MAC address filtering for the Guest WLAN.
Define the filter action for the list of MAC addresses in the MAC Address table.
Select Deny to block access to the NBG334W, MAC addresses not listed will be
allowed to access the NBG334W
Select Allow to permit access to the NBG334W, MAC addresses not listed will be
denied access to the NBG334W.
This is the index number of the MAC address.
Enter the MAC addresses of the wireless station that are allowed or denied access to
the NBG334W in these address fields. Enter the MAC addresses in a valid MAC
address format, that is, six hexadecimal character pairs, for example,
12:34:56:78:9a:bc.
Click Apply to save your changes back to the NBG334W.
Click Reset to reload the previous configuration for this screen.
Chapter 9 Guest WLAN
119