Mac Filter - ZyXEL Communications NBG6515 User Manual

The following table describes the labels in this screen.
Table 40 Network > Wireless LAN 2.4G/5G > General: WPA-PSK/WPA2-PSK
L ABEL
Security Mode
WPA
Compatible
Pre-Shared Key
Group Key
Update Timer
Apply
Reset
Refer to Table 37 on page 82
11.6 MAC Filte r
The MAC filter screen allows you to configure the NBG to give exclusive access to devices (Allow) or
exclude devices from accessing the NBG (Deny). Every Ethernet device has a unique MAC (Media
Access Control) address. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC address of the
devices to configure this screen.
To change your NBG's MAC filter settings, click
. The screen appears as shown.
Filte r
Network > Wireless LAN 2.4G/5G > MAC Filter
Fig ure 65
Chapter 11 Wireless LAN
DESC RIPT IO N
Select or
WPA- PSK WPA2- PSK
This field appears when you choose
Check this field to allow WiFi devices using
uses a simple common password for authentication.
WPA- PSK/ WPA2- PSK
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
The
G ro up Ke y Upda te T im e r
Click to save your changes back to the NBG.
Apply
Click to begin configuring this screen afresh.
Re se t
for descriptions of the other labels in this screen.
NBG6515 User's Guide
to enable data encryption.
as the
WPA- PSK2 Se c urity Mo de
security mode to connect to your NBG.
WPA- PSK
is the rate at which the AP sends a new group key out to all clients.
>
Ne two rk Wire le ss L AN 2.4G
87
.
or >
Wire le ss L AN 5G MAC