Chapter 5 Wireless LAN
Figure 45 WPS Station
The following table describes the labels in this screen.
Table 36 WPS Station
LABEL
Push Button
Or input station's
PIN number
92
DESCRIPTION
Use this button when you use the PBC (Push Button Configuration) method to
configure wireless stations's wireless settings. See
Click this to start WPS-aware wireless station scanning and the wireless security
information synchronization.
Use this button when you use the PIN Configuration method to configure wireless
station's wireless settings. See
Type the same PIN number generated in the wireless station's utility. Then click
Start to associate to each other and perform the wireless security information
synchronization.
Section 6.2.1 on page
Section 6.2.2 on page
95.
NBG334W User's Guide
94.