The Default_L2Tpvpn Ipsec Vpn Rule; The Ipsec Vpn Monitor Screen - ZyXEL Communications SBG3500-N000 User Manual

22.4.3 The Default_L2TPVPN IPSec VPN Rule

A default IPSec VPN rule (Default_L2TP_VPN) is predefined. It can be edited but cannot be
removed. This rule is used for L2TP VPN exclusively and is disabled by default.
The following table lists the default settings for the Default_L2TP_VPN IPSec VPN.
Table 104 Default settings for Default_L2TP_VPN
Enabled
Nailed-up
NAT Traversal
Application Scenario
My Address
Life time
Negotiation Mode
Encryption /
Authentication
Key Group
Dead Peer Detection
(DPD)
XAUTH

22.5 The IPSec VPN Monitor Screen

In the Web Configurator, click VPN > IPSec VPN > Monitor. Use this screen to display and
manage active VPN connections.
Figure 146 VPN > IPSec VPN > Monitor
Chapter 22 IPSec VPN
GENERAL
No
No
Yes
Remote Access
Any
PHASE 1
86400
Main
3DES / SHA1
3DES / MD5
AES256 / SHA1
DH2
Yes
No
SBG3500-N Series User's Guide
285
AUTHENTICATION
Pre-Shared Key
Certificate
Local ID Type
Content
Remote ID Type
PHASE 2
Life time
Tunnel Mode
Encryption
Authentication
Perfect Forward Secrecy
(PFS)
Encapsulation
selected (text) 12345678
none
IP
0.0.0.0
Any
3600
ESP
DES
3DES
AES256
MD5
SHA1
No
Transport