Client List; Status: Vpn Status - ZyXEL Communications P-793H v3 User Manual

P-79x series g.shdsl.bis broadband gateway
Hide thumbs Also See for P-793H v3:
Table of Contents

Advertisement

Table 7 Status Screen
LABEL
CPU Usage
Memory
Usage
Interface Status
Interface
Status
Rate
Summary

Client List

VPN Status
AnyIP Table
Packet
Statistics
3.3 Client List
See
Section 8.4 on page 80

3.4 Status: VPN Status

See
Section Figure 80 on page 139
Chapter 3 Status Screens
DESCRIPTION
This field displays what percentage of the P-79X's processing ability is currently
used. When this percentage is close to 100%, the P-79X is running at full load,
and the throughput is not going to improve anymore. If you want some
applications to have more throughput, you should turn off other applications (for
example, using QoS; see
Chapter 17 on page
This field displays what percentage of the P-79X's memory is currently used.
Usually, this percentage should not increase much. If memory usage does get
close to 100%, the P-79X is probably becoming unstable, and you should restart
the device. See
Section 23.4 on page
power) for a few seconds.
This column displays each interface the P-79X has.
This field indicates whether or not the P-79X is using the interface.
For the DSL interface, this field displays Down (line is down), Up (line is up or
connected) if you're using Ethernet encapsulation and Down (line is down), Up
(line is up or connected), Idle (line (ppp) idle), Dial (starting to trigger a call)
and Drop (dropping a call) if you're using PPPoE encapsulation.
For the LAN interface, this field displays Up when the P-79X is using the
interface and Down when the P-79X is not using the interface.
For the LAN interface, this displays the port speed and duplex setting.
For the DSL interface, it displays the downstream and upstream transmission
rate.
Click this link to view current DHCP client information. See
80.
Click this link to view the status of any VPN tunnels the P-79X has negotiated.
See
Section 3.4 on page
27.
Click this link to view a list of IP addresses and MAC addresses of computers,
which are not in the same subnet as the P-79X. See
Click this link to view port status and packet specific statistics. See
on page
28.
for information on this screen.
for information on this screen.
P-79X Series User's Guide
167).
228, or turn off the device (unplug the
27
Section 8.4 on page
Section 3.5 on page
28.
Section 3.6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P-792h v3P-791r v3

Table of Contents