ZyWALL 10~100 Series Internet Security Gateway
Policy Set Name= set1
Active= Yes
Criteria:
IP Protocol
Type of Service= Don't Care
Precedence
Source:
Destination:
Action= Matched
Gateway addr
Type of Service= No Change
Precedence
Press Space Bar to Toggle.
Step 3.
Check Menu 25.1 - IP Routing Policy Setup to see if the rule is added correctly.
Step 4.
Create another policy set in menu 25.
17-8
Menu 25.1.1 - IP Routing Policy
= 6
= Don't Care
addr start= 192.168.1.2
port start= 0
addr start= 0.0.0.0
port start= 80
= 192.168.1.1
= No Change
Press ENTER to Confirm or ESC to Cancel:
Figure 17-8 IP Routing Policy Example
Packet length= 10
Len Comp= N/A
end= 192.168.1.64
end= N/A
end= N/A
end= 80
Log= No
IP Policy Routing