Figure 188 Ip Routing Policy Example; Figure 189 Ip Routing Policy Example 1 - ZyXEL Communications P-791R V2 - V3.40 User Manual

Chapter 31 IP Routing Policy Setup

Figure 188 IP Routing Policy Example

To force Web packets coming from clients with IP addresses of 192.168.1.33 to 192.168.1.64
to be routed to the Internet via the WAN port of the ZyWALL, follow the steps as shown next.
1 Create a rule in Menu 25.1 - IP Routing Policy Setup as shown next.

Figure 189 IP Routing Policy Example 1

2 Select Yes in the LAN field in menu 25.1.1 to apply the policy to packets received on the
LAN port.
3 Check Menu 25 - IP Routing Policy Summary to see if the rule is added correctly.
4 Create another rule in menu 25.1 for this rule to route packets from any host (IP=0.0.0.0
means any host) with protocol TCP and port FTP access through another gateway
(192.168.1.100).
266
Menu 25.1.1 - IP Routing Policy
Policy Set Name= example1
Active= Yes
Criteria:
IP Protocol = 6
Type of Service= Don't Care
Precedence = Don't Care
Source:
addr start= 192.168.1.33
port start= 0
Destination:
addr start= 0.0.0.0
port start= 80
Action= Matched
Gateway addr = 192.168.1.1
Type of Service= Max Thruput
Precedence = 0
Packet length= 10
Len Comp= Equal
end= 192.168.1.64
end= N/A
end= N/A
end= 80
Log= No
P-791R v2 User's Guide