KTM 450 SX-F EU Repair Manual page 37

Ol/FORK, TRIPLE CLAMP
200670-1Q
- Slide on support ring
- Remove the special tool.
- Roughen, clean and lubricate the edges of the sliding bushings using 600 grit
sandpaper.
1
Fork oil (SAE 5)
(or
p. 224)
- Slide on lower sliding bushing
- Mount upper sliding bushing
• Info
I
Gently pull them apart without using a tool.
- Slide on the outer tube.
- Warm up the outer tube in area of the lower sliding bushing.
Guideline
150°C (122
OF)
- Hold the lower sliding bushing with the longer shoulder of the special tool.
1
Assembly tool (T1402S)
(or
p. 239)
- Press the outer tube all the way in.
- Position the support ring.
- Hold the seal ring with the shorter shoulder of the special tool.
1
Assembly tool (T1402S)
(or
p. 239)
- Press the outer tube all the way in.
- Mou nt lock ri ng
• Info
I
The lock ring must audibly lock into place.
- Install dust boot
- Mou nt fork protector ri ng
37