Disassembling The Screw Cap With The Membrane Holder; Preliminary Work - KTM 450 SX-F EU Repair Manual

Ol/FORK, TRIPLE CLAMP
21
- Remove the piston ring from the piston.
200859-10
- Remove compression shim stack
- Remove spri ng
- Remove tap rebound
- Remove spring with the sleeve.
- Remove the valve with the spring from tap rebound
- Remove the O-ri ngs.
200862-10
Disassamblin tIIa screw cap with tIIa mambrana holdar
• Info
I
The steps are identical for both fork legs.
Preliminary work
- Disassemble the fork legs. (-- p. 15)
- Disassemble the cartridge. (-- p. 18)
Main work
- Clamp the screw cap with the membrane holder and the special tool into a vise.
I
Pin wrench (Tl03) (-- p. 235)
• Info
I
Only tighten the vise lightly.
- Remove compression holder
200861HO