18
30/ENGINE
18.3.14 Removing the shift shaft
18.3.15 Removing the shift drum locating unit
18.3.16 Removing the locking lever
18.3.17 Removing the rotor
–
Take off primary gear
–
Remove the distance sleeve.
202754-10
–
Push sliding plate
shaft
with the washer.
3
202755-10
–
Remove screw
–
Push away locking lever
drum locating unit.
–
Relieve tension from the locking lever.
202756-10
–
Remove screw
–
Take off locking lever
202757-10
–
Hold the rotor with special tool
Holding spanner, rotor (55129001000) (
–
Remove nut
202758-10
.
8
away from the shift drum locating unit
1
.
1
from shift drum locating unit
2
.
1
with the sleeve and spring.
2
.
1
and washer.
2
. Remove shift
2
and remove the shift
3
p. 208)
115