Storage And Transportation; Technical Specification - 3M Versaflo M-Series User Instructions

Forehead comfort pad.
Detach the comfort pad from the headband. Wrap the replacement comfort pad around
the headband and re-attach (Fig 21).
Head, neck and shoulder cover (M-100/M-300 Series only).
Remove the black visor gasket from the groove (Fig 20). Insert headtop into cover and
pull the air inlet fully through the opening in the back of the cover. Insert the gasket on the
cover firmly and fully into the groove on the top of the visor frame.
Flame resistant headtop cover.
Remove the black visor gasket from the groove (Fig 20). Insert the gasket on the cover
firmly and fully into the groove on the top of the visor frame. Pull loop on headtop cover
over the air inlet on the headtop.
The air inlet fits through the hole in the back of the cover. Note: If fitting the cover in
combination with the ear muff assembly, please see the ear muff assembly instructions
below.
Chin strap.
Attach the chin strap to the attachment points on the head suspension (Fig 22).
Headtop mounted ear muff assembly (M-100/M-300 Series only).
Locate the attachment points (Fig 23 and 24 ). As worn, the right side mount is marked
'X' and the left side mount is marked 'O' (Fig 25). The earmuff should be attached as
shown in Fig 26.
Use a screwdriver to push in the attachment points before screwing the ear muff
assembly as tightly as possible to the shell.
Note: If using the ear muff assembly in combination with the flame resistant headtop
cover, the attached ear muffs must first be pulled through the slits in the headtop cover
before pulling the loop on the cover over the air inlet.

STORAGE AND TRANSPORTATION

These products should be stored in the packaging provided in dry, clean conditions away
from sources of high temperature and petrol and solvent vapours.
^ Do not store in direct sunlight.
Do not store outside the temperature range -30°C to +50°C or with humidity above 90%.
If the product will be stored for an extended period of time before use, the suggested
storage temperature is 4°C to 35°C.
When stored as stated, the maximum life (shelf life plus in-use life) is 3 years from date of
manufacture.
The original packaging is suitable for transporting the product.

TECHNICAL SPECIFICATION

(Unless otherwise stated in the Reference Leaflet)
Respiratory Protection
M-100, M-300 and M-400 Series:
Minimum Protection Factor = 50 for particulates when connected to 3MTM Dustmaster,
3MTM VersafloTM TR-602E and TR-302E, 3MTM JupiterTM and 3MTM Adflo Powered
Air Turbos.
Minimum Protection Factor = 10 for gas/vapours when connected to 3MTM VersafloTM
TR-602E , 3MTM JupiterTM and 3MTM Adflo Powered Air Turbos.
Minimum Protection Factor = 100 when connected to 3MTM VersafloTM V-100, V-200,
V-300 or V-500E Supplied Air Regulators.
Eye Protection
Visor surround - EN166:3:9:BT (Liquid splash 3, molten metal 9 and medium energy
impact at extremes of temperature BT).
M-925 Visor – EN166:1:BT:3:9 (Optical class 1, medium energy impact at extremes of
temperature BT, liquid splash 3 and molten metal 9)
M-927 Visor – EN166:1:BT:3 (Optical class 1, medium energy impact at extremes of
temperature BT and liquid splash 3).
Head protection
The M-306 and M-307 headtops with M-300 helmet shell meet the requirements of
EN397 (see below) and AS/NZS 1801.
The M-406 and M-407 headtops with M-400 helmet shell meet the requirements of
EN397 (see below) and AS/NZS1801.
LD - Lateral deformation.
440 V a.c. - Electrical insulation.
Flow Characteristics
Manufacturers Minimum Design Flow (MMDF).
170 l/min 3M™ Versaflo™ TR-602E and TR-302E Powered Air Turbo and 3M™ Versaflo
™ V-100, V-200 and V-500E Regulators
160 l/min (3M™ Adflo™ Powered Air Turbo)
150 l/min (3M™ Jupiter™ and Dustmaster™ Powered Air Turbo and 3M™ V-500, 3M
™ Vortemp™ and 3M™ Vortex Regulators).
Note: When using the M-Series headtops in combination with the 3M™ V-Series
Regulators, the recommended pressure range is 4 - 6 bar).
Maximum Flow - See appropriate User Instructions.
Head Size
One size, adjustable to fit 51cm to 64cm (UK sizes 6 – 8).
Breathing tube lengths
008-00-42P – 930mm
BRT-23 – 830mm
BT-30 – 525mm to 850mm (21 inches to 34 inches)
BT-40 – 840mm (33 inches)
834008 - 950mm (37 inches)
834016 - 525mm to 850mm (21 inches to 24 inches)
834017 - 775mm (31 inches)
Operating Temperature
-10ºC to +55ºC
Weight
M-106 544 g, M-107 544 g, M-306 832 g, M-307 832 g, M-406 1066 g and M-407 1066 g.
92