Figure 13 Internet Setup Wizard: Isp Parameters (Pppoe); Table 8 Internet Setup Wizard: Isp Parameters (Pppoe) - ZyXEL Communications P-793H User Manual

P-793H User's Guide
Table 7 Internet Setup Wizard: ISP Parameters (Ethernet)
LABEL
First DNS
Server
Second DNS
Server
Back
Apply
Exit
This screen appears if your Internet connection uses PPPoE encapsulation.

Figure 13 Internet Setup Wizard: ISP Parameters (PPPoE)

The following table describes the fields in this screen.

Table 8 Internet Setup Wizard: ISP Parameters (PPPoE)

LABEL
User Name
Password
Service Name
Back
Apply
Exit
58
DESCRIPTION
Enter the IP address(es) of the DNS server(s) provided by your ISP. If your ISP did
not provide one or both, use the default value(s).
Click Back to go back to the previous screen.
Click Apply to finish manual configuration.
Click Exit to close the wizard screen without saving your changes.
DESCRIPTION
Enter the user name exactly as your ISP assigned. If assigned a name in the form
user@domain where domain identifies a service name, then enter both components
exactly as given.
Enter the password associated with the user name above.
Type the name of your PPPoE service here. Leave this field blank if your ISP did not
provide you a PPPoE service.
Click Back to go back to the previous screen.
Click Apply to finish manual configuration.
Click Exit to close the wizard screen without saving your changes.
Chapter 3 Wizards