Table of Contents
Advertisement
5.2 Wall Mounting Instructions
To hang your ZyXEL Device on a wall:
Select a position free of obstructions on a sturdy wall.
1
Drill two holes for the screws. Make sure the distance between the centers of the
2
holes and the size of screws match the specifications
Note: Be careful to avoid damaging pipes or cables located inside the wall when
drilling holes for the screws.
Do not screw the screws all the way into the wall. Leave a small gap of about 0.5
3
cm between the heads of the screws and the wall.
Make sure the screws are snugly fastened to the wall. They need to hold the
4
weight of the ZyXEL Device with the connection cables.
Align the holes on the back of the ZyXEL Device with the screws on the wall. Hang
5
the ZyXEL Device on the screws.
P-27XX Series User's Guide
Chapter 5 Specifications
(Section on page
29).
33
Advertisement
Table of Contents
