Linking Odd-Numbered/Even-Numbered Channels (Stereo Link) - Zoom MRS-802 Operation Manual

H
INT
When the send level is shown on the display, pressing the
[ENTER] key will turn the signal output to the send return
effect off. Pressing the key once more will turn the signal on
again.
6.
When you have finished making settings, press the
[EXIT] key.
The unit returns to the main screen.
Linking odd-numbered/even-
numbered channels (stereo link)
Adjacent odd-numbered/even-numbered mono channels (1/
2, 3/4, 5/6, 7/8) can be linked and used as a pair of stereo
tracks. (This is referred to as "stereo link".) The parameters
and status keys of two stereo-linked channels will operate in
tandem. The setting procedure is as follows.
1.
Press the [TRACK PARAMETER] key in the track
parameter section.
2.
Press the status key (1 - 8) for one of the two
channels that you want to stereo-link.
3.
Press the cursor down key several times.
The following screen appears.
TR7 TR7
ST LINK ST LINK
4.
Turn the dial to switch the setting ON.
Stereo linking will be enabled for the selected channel and
the adjacent odd-numbered/even-numbered channel. To
defeat the stereo link, turn this parameter OFF.
TR7/8 TR7/8
ST LINK ST LINK
ZOOM MRS-802
OFF
ON
5.
When the setting is complete, press the [EXIT] key.
The unit returns to the main screen.
H
INT
The PAN parameter of two stereo-linked channels will
function as a BALANCE parameter that adjusts the volume
balance between the odd-numbered / even-numbered
channels.
N
OTE
To adjust the volume of stereo-linked channels, use the odd-
numbered fader. (The even-numbered fader will have no
effect.)
Reference [Mixer]
73