Zoom MRS-802 Operation Manual page 26

Quick Tour
When a recording track has not been selected
Track 1
Track 2
When a recording track (track 1) has been selected
Track 1
Track 2
H
INT
You can select up to two tracks simultaneously for recording.
(Allowable track pairs are 1/2, 3/4, 5/6, and 7/8.)
2.
Set fader 1 and the [MASTER] fader to 0 dB. Then
adjust the volume of the monitor system while
playing your instrument.
3.
To begin recording, press the ZERO [
return to the beginning of the song. Then hold
O
down the REC [ ] key and press the PLAY [
O
The REC [ ] key and PLAY [
recording will begin. Record your instrument playing while
listening to the rhythm section.
The recording level can be checked with the IN1/IN2 level
meter in the lower left of the display and the [CLIP]
indicator of the [REC LEVEL] control.
Basic operation of transport keys
ZERO [U] key
Returns the recorder to the start
position (counter zero position).
STOP [P] key
Stops the recorder.
26
MASTER
MASTER
1
U
] key to
R
] key.
R
] key will light, and
REW [T] key
Moves the current position back in 1-second steps.
Movement speed can be increased by holding down the
REW [T] key and pressing the FF [Y] key.
PLAY [R] key
Starts playback from the current position.
4.
When you have finished recording, press the STOP
P
[ ] key.
O
The REC [ ] key and PLAY [
recording will stop. The indication "wait..." is briefly shown
on the display, and then the main screen returns.
N
OTE
The duration of the "wait..." period may differ depending on
the recording cordition. Never turn power to the unit off while
"wait..." is being shown on the display. Otherwise recorded
data may be lost and damage to the unit may occur.
5.
To listen to the recorded content, press the ZERO
U
[ ] key to return to the beginning of the song, and
R
press the PLAY [
The track will be played back together with the rhythm
section.
H
INT
T
The REW [ ] key and FF [
recorder is in the stop mode.
6.
To stop playback, press the STOP [
want to re-do the recording, repeat steps 3 and 4.
7.
Press status key 1 until the key is lit in green.
The recording standby condition of track 1 is canceled.
H
INT
• Recorded content can be copied, deleted, or edited as an
entire track or by specifying a range (
• By using switching the V-take for the track, you can record
a new take while preserving the current take (
FF [Y] key
Moves the current position forward in 1-second
steps. Movement speed can be increased by
holding down the FF [Y] key and pressing the
REW [T] key.
REC [O] key
When this key is held down while pressing the
PLAY [R] key, the recorder starts to record.
Pressing this key during playback causes punch-
in, and pressing the key during recording causes
punch-out.
R
] key will go out, and
] key.
Y
] key only operate when the
P
] key. If you
→
p. 46).
→
p. 33).
ZOOM MRS-802