Zoom MRS-802 Operation Manual page 152

Appendix
■ MASTERING algorithm
● 3 BAND COMP/Lo-Fi module
Type
XOVER_Lo
MLT CMP
An effect that divides the input signal into three frequency bands and lets you specify a compressor and mix amount for each band.
CHARA
Lo-Fi
An effect that intentionally degrades the audio quality of the sound.
Parameter Description
Parameter Name
XOVER_Lo
XOVER_Hi
SNS_HIGH
SENS_MID
SENS_LOW
MIX_HIGH
MIX_MID
MIX_LOW
CHARA
COLOR
DIST
TONE
EFX LVL
DRY LVL
● NORMALIZER module
Type
NORMMLZR
Lets you set the output level of the 3 BAND COMP/Lo-Fi module.
Parameter Description
Parameter Name
GAIN
● 3 BAND EQ module
For an explanation of types and parameters, see the CLEAN, DIST, ACO/BASS SIM, BASS algorithm.
● ZNR module
For an explanation of types and parameters, see the CLEAN, DIST, ACO/BASS SIM, BASS algorithm.
● VOL PDL module
For an explanation of types and parameters, see the CLEAN, DIST, ACO/BASS SIM, BASS algorithm.
152
XOVER_Hi SNS_HIGH
COLOR DIST
Setting Range
50 – 16000
50 – 16000
0 – 15
0 – 15
0 – 15
OFF, -24 – 6
OFF, -24 – 6
OFF, -24 – 6
0 – 10
1 – 10
0 – 10
0 – 10
0 – 30
0 – 30
Setting Range
-12 – 12
Parameter
SENS_MID SENS_LOW
TONE EFX LVL
Parameter Description
Adjusts the frequency for bass/midrange division.
Adjusts the frequency for midrange/treble division.
Adjusts the compressor input sensitivity for the treble range.
Adjusts the compressor input sensitivity for the midrange.
Adjusts the compressor input sensitivity for the bass range.
Adjusts the treble mix amount.
Adjusts the midrange mix amount.
Adjusts the bass mix amount.
Specifies the character of the filter.
Specifies the color.
Adjusts the degree of distortion.
Adjusts the tone.
Adjusts the mix amount of the effect sound.
Adjusts the mix amount of the direct sound.
Parameter
GAIN
Parameter Description
Adjusts the level.
MIX_HIGH MIX_MID
DRY LVL
ZOOM MRS-802
MIX_LOW