Editing A Rhythm Pattern; Adjusting The Drum Volume Balance - Zoom MRS-802 Operation Manual

Reference [Rhythm]
Drum track
Snare
Kick
Snare
Kick
8.
When you have finished recording, press the STOP
P
[ ] key.
Pattern recording will stop, and the unit returns to the
rhythm pattern screen. Press the PLAY [
pattern that you recorded.
When you select an empty pattern and record it, the pattern
name "Patxxx" (where xxx is the pattern number) is
automatically assigned. You can edit this pattern name as
necessary (→ p. 95).
9.
To terminate pattern recording and return to the
main screen, press the [EXIT] key several times.
H
INT
• If you use a MIDI keyboard connected to the MIDI IN
connector for real-time input, you can add intensity
information for each note. (For information on which drum
sound corresponds to which note number, see p. 161.)
• When the MRS-802 is in the default condition, the MIDI
receive channel for the drum kit is set to 10. For real-time
input using a MIDI keyboard, set the MIDI send channel of
the keyboard also to 10.
• The MIDI receive channel for the drum kit can be changed
→
if desired ( p. 130).
• After changing the quantize value (
restart real-time input. In this case, the timing of notes that
have already been input does not change. For example,
you could record hi-hat play with 32nd notes and then
switch to 16th notes for snare and kick drum input.
94
R
] key to hear the
→
p. 90), you can

Editing a rhythm pattern

This section explains how to edit an existing rhythm pattern.

Adjusting the drum volume balance

The volume of the drum kit can be adjusted with the
[DRUM] fader in the mixer section. If necessary, the volume
level of the drum kit can also be individually programmed
for each rhythm pattern.
1.
In rhythm pattern mode ([SONG/PATTERN] key
out), press the [DRUM] key so that it is lit.
2.
Press the [EDIT] key.
The rhythm pattern edit menu appears on the display.
EDIT EDIT
Quantize Quantize
3.
Use the cursor left/right keys to bring up the
indication "EDIT Dr Level" on the display, and
press the [ENTER] key.
This screen allows you to specify the rhythm section
volume.
Dr Level Dr Level
The display shows the current volume setting (0 - 15).
4.
Turn the dial to select the desired setting, and then
press the [EXIT] key.
The setting is accepted, and the rhythm pattern edit menu
appears again.
5.
To return to the main screen, press the [EXIT] key
several times.
15 15
ZOOM MRS-802