Saving All Projects To Cd-R/Rw Disc - Zoom MRS-802 Operation Manual

Saving all projects to CD-R/RW disc

You can save all projects on the hard disk to CD-R/RW
media for backup.
If the total size of all projects is larger than the capacity of
one CD-R/RW disc, the backup will automatically extend
over multiple volumes, with lower-numbered projects being
placed on lower-numbered discs.
PRJ 000
Backup
PRJ 001
PRJ 002
PRJ 003
PRJ 004
MRS-802
N
OTE
Also if all projects were saved in one operation, restoring will
be on a single-project basis.
1.
Insert a CD-R or CD-RW into the CD-R/RW drive.
To back up projects, use a blank CD-R/RW disc or a CD-
RW disc that has been completely erased.
2.
From the main screen, press the [CD-R/RW] key in
the display section.
The CD-R/RW menu appears.
3.
Use the cursor left/right keys to bring up the
indication "CD-R/RW BACKUP" on the display, and
press the [ENTER] key.
The display shows the backup/restore menu.
BACKUP BACKUP
SAVE SAVE
4.
Use the cursor left/right keys to bring up the
indication "BACKUP ALL SAVE" on the display, and
press the [ENTER] key.
ZOOM MRS-802
PRJ 000
Disc 1
PRJ 001
PRJ 001
Disc 2
PRJ 002
PRJ 002
PRJ 003
Disc 3
PRJ 004
The display shows the space required for the backup of all
projects in MB (megabytes).
SIZE SIZE
5.
Press the [ENTER] key.
The indication "ALL SAVE SURE?" appears on the display.
ALL SAVE ALL SAVE
SURE? SURE?
6.
To execute the backup, press the [ENTER] key. To
cancel, press the [EXIT] key instead.
When you press the [ENTER] key, backup starts from the
project with the lowest number. The display shows the disc
number, the project number, and the indication
"BURNING".
When backup is finished, the display indication changes to
"ALL SAVE COMPLETE".
Disc number
DISC001 DISC001
BURNING BURNING
Project currently being saved
If the backup size is larger than the capacity of one CD-R/
RW disc, the disc will be ejected after it has been filled up,
and a message prompting the user to insert the next CD-R/
RW disc appears.
CHANGE CHANGE
DISC002 DISC002
Projects already saved
The number at bottom right indicates up to which project is
saved on this disc.
7.
When the above message appears, insert a new
CD-R/RW disc, and press the [ENTER] key.
The backup operation resumes. If more than two discs are
required, the above steps will be repeated. When the backup
Reference [Creating a CD]
478MB 478MB
4
5
121