Combining Multiple Tracks On Another Track (Bounce Function); How Bounce Works; Making Bounce Settings - Zoom MRS-802 Operation Manual

3.
To stop playback, press the STOP [
4.
To cancel the master track playback mode, press
the [MASTER] status key so that the key goes out.
Muting of tracks 1 - 8 and the rhythm section is canceled,
and the unit returns to normal operation. Status keys that
were automatically turned off are returned to the previous
condition.
ZOOM MRS-802
P
] key. Combining multiple tracks on
another track (Bounce function)

How bounce works

"Bounce" is a function that mixes the performances of the
recorder section and the drum track, and records them on
one or two tracks. (This is sometimes called "ping-pong
recording".)
For example, you might bounce the contents of tracks 1 - 6
onto tracks 7/8 and then switch the V-takes of tracks 1 - 6 to
record new versions of your performance.
• You can also mix the signals from the INPUT jacks into the
• If you select only one mono track as the bounce
• If necessary, you can play back all eight tracks, and

Making bounce settings

Before using the bounce function, you may have to make
certain settings.
■ Specifying playback/mute for the
In the default condition of the MRS-802, the bounce
destination recording track(s) will be muted. If you want to
play back a track while you bounce-record on another V-
take of that track, use the following procedure to change the
H
INT
bounce recording.
destination, the signal mixed to mono will be recorded.
bounce onto empty V-takes.
recording track(s)
Reference [Recorder]
39