Copying A Phrase - Zoom MRS-802 Operation Manual

Reference [Phrase Looping]
2.
Use the cursor left/right keys to bring up the
indication "UTILITY PHRASE" on the display, and
press the [ENTER] key.
The names and numbers of phrases in the phrase pool appear
on the display.
PHRASE PHRASE
REST REST
3.
Turn the dial to select the number of the phrase you
want to edit.
When you press the PLAY [
played. If you select a number where no phrase is imported,
the indication "EMPTY" appears instead of the phrase
name.
4.
Press the [EDIT] key.
The phrase edit menu appears.
PHRASE PHRASE
MEAS X02 MEAS X02
5.
Use the cursor up/down keys to call up the
parameter you want to edit.
• MEAS X xx (xx = 01 - 99)
You can set the number of measures in the range from 1 - 99.
• TIMSIG (Beat)
You can set the number of beats per measure in the phrase.
The setting range is 1 (1/4) to 8 (8/4).
• START
You can adjust the phrase start point in minutes, seconds,
and milliseconds.
• END
You can adjust the phrase end point in minutes, seconds, and
milliseconds.
• NAME
You can specify a name for the phrase.
• LVL
You can adjust the phrase playback level in the range of ±24
dB.
62
0
R
] key, the selected phrase is
1
6.
Use the dial and the cursor left/right keys to adjust
the setting value.
• Adjusting MEAS/TIMSIG/LVL
Turn the dial to set the numerical value.
• Adjusting START/END
Use the cursor left/right keys to select the unit, and turn the
dial to set the numerical value.
• Adjusting NAME
Use the cursor left/right keys to select the character to edit,
and turn the dial to select the character.
H
INT
R
You can use the PLAY [ ] key to check the phrase both
during and after editing.
7.
Repeat steps 5 - 6 to complete the phrase.
If desired, press the [EXIT] key several times to return to the
screen of step 2, and select another phrase parameter.
8.
To return to the main screen, press the [EXIT] key
several times.

Copying a phrase

You can copy a phrase to any other phrase number. Any
phrase at the copy destination will be overwritten (erased).
This is convenient for example to use one phrase as a
starting point and save it with different parameter settings.
1.
From the main screen, press the [UTILITY] key in
the display section.
The utility menu appears on the display.
UTILITY UTILITY
TR EDIT TR EDIT
2.
Use the cursor left/right keys to bring up the
indication "UTILITY PHRASE" on the display, and
press the [ENTER] key.
The display changes as follows.
ZOOM MRS-802