Duplicating A Project; Erasing A Project - Zoom MRS-802 Operation Manual

Reference [Projects]
• REMAIN (h/m units)
The approximate recordable time remaining for each track is
shown in hours (h)/minutes (m)/seconds.
REMAIN REMAIN
45h55m46 45h55m46
• PRJ SIZ (MB units)
This shows the size of the currently loaded project in MB
(megabyte) units.
PRJ SIZE PRJ SIZE
00122MB 00122MB
• PRJ SIZ (h/m units)
This shows the size of the currently loaded project in terms
of the recorded time per track, in hours (h)/minutes (m)/
seconds.
PRJ SIZE PRJ SIZE
00h24m13 00h24m13
H
INT
• These screens are for display only, and contain no items
that can be edited.
• The remaining recordable time is an approximation.

Duplicating a project

This operation copies a specified project that is saved on the
hard disk.
1.
Refer to steps 1 - 2 of "Basic procedure" to bring
up the indication "PROJECT COPY" on the display.
Then press the [ENTER] key.
The name and number of the project to copy are shown on
the display.
PRJ COPY PRJ COPY
PRJ012 PRJ012
Project name
2.
Turn the dial to select the copy source project, and
press the [ENTER] key.
126
12
Project number
The screen for selecting the copy destination project appears
on the display.
PRJ COPY PRJ COPY
COPY TO COPY TO
Copy destination project number
3.
Turn the dial to select the copy destination project
number, and press the [ENTER] key.
The indication "SURE?" appears on the display.
4.
Press the [ENTER] key to copy the project, or press
the [EXIT] key to cancel.
When copying is completed, the unit returns to the main
screen.

Erasing a project

This operation erases the specified project from the hard
disk.
1.
Refer to steps 1 - 2 of "Basic procedure" to bring
up the indication "PROJECT ERASE" on the
display. Then press the [ENTER] key.
The project to erase is shown on the display.
PRJ ERS PRJ ERS
PRJ011 PRJ011
Project name
2.
Turn the dial to select the project to be erased.
3.
Press the [ENTER] key to erase the project, or
press the [EXIT] key to cancel.
To return to main screan after erasing is completed, press the
[EXIT]key.
N
OTE
• Once a project has been erased, it cannot be recovered.
Use this operation with care.
• This item cannot be selected for projects with the protect
ON setting.
14
11
Project number
ZOOM MRS-802