Zoom MRS-802 Operation Manual page 32

Quick Tour
2.
R
Press the PLAY [
check the level after the [MASTER] fader.
This can be done by observing the level meter in the lower
right of the display. If the 0 dB indicator lights up during
play, turn down the [MASTER] fader to perform fine
adjustment. After checking the level, press the STOP [
key.
Left channel
signal level
3.
Repeatedly press the [MASTER] status key so that
the key lights up in red.
The master track can now be recorded.
4.
Hold down the REC [
R
[ ] key.
Recording on the master track starts.
5.
When recording is completed, press the STOP [
key.
6.
To play the master track, repeatedly press the
[MASTER] status key until it is lit in green.
In this condition, the master track can be played. All other
status keys automatically go out and the signals from other
tracks are automatically muted.
7.
U
Press the ZERO [
of the song, and press the PLAY [
The master track is played back. To stop playback, press the
P
STOP [ ] key.
32
] key to play the song, and
Right channel
signal level
O
] key and press the PLAY
] key to return to the beginning
R
] key.
8.
To return the MRS-802 to normal operation,
repeatedly press the [MASTER] status key until it is
out.
Muting of other tracks is canceled, and the status keys revert
to the original condition.
P
]
H
INT
• With the CD-R/RW drive, you can record the contents of
the master track onto CD-R/RW media to create an audio
CD. For details, refer to page 111.
• The contents of the master track can also be edited later.
P
]
ZOOM MRS-802