Zoom MRS-802 Operation Manual page 104

Reference [Effects]
Algorithm
CLEAN
COMP COMP
DIST
ACO/BASS SIM
COMP
BASS
COMP/LIM COMP/LIM
MIC
COMP/LIM
COMP Lch COMP Lch
DUAL MIC
COMP/LIM
COMP/LIM COMP/LIM
LINE
COMP/LIM
CMP/LoFi CMP/LoFi
MASTERING
3BAND COMP/
Lo-Fi
N
OTE
The table above shows the condition when the effect module
is On. When the effect module is Off, the second line of the
display shows "-OFF-".
4.
If you want to switch the effect type for the
selected module, turn the dial to select the desired
effect type.
MOD/DLY MOD/DLY
FLANGER FLANGER
Effect type name
H
INT
• If the contents of a patch have been edited, the "EDIT"
indicator in the upper part of the display will change to
"EDITED".
• If "TOTAL" is shown on the display, you can use the cursor
up/down keys to select PAT LVL, ZNR, or VOL PDL.
N
OTE
Some effect modules have only one effect type. For such
modules, there will be no screen for selecting the effect type.
5.
Use the cursor up/down keys to select the effect
parameter that you want to edit.
When you use the cursor up/down keys, a setting screen for
the effect types and parameters for this module is shown.
The following diagram shows an example of what appears
on the display when you have selected the DEPTH
parameter of the "FLANGER" effect.
104
Module/Display
PRE/DRV PRE/DRV 3BandEQ 3BandEQ
PRE AMP/DRIVE
MIC PRE MIC PRE 3BandEQ 3BandEQ
MICPRE+DE-ESSER
MicPre L MicPre L EQ Lch EQ Lch
MICPRE
3BandEQ 3BandEQ
ISOLATOR ISOLATOR
ISOLATOR
NORMLZR NORMLZR 3BandEQ 3BandEQ
NORMALIZER
MOD/DLY MOD/DLY
EQ MODULATION/DELAY
MOD/DLY MOD/DLY
EQ MODULATION/DELAY
DOUBLE L DOUBLE L
EQ DOUBLING
MOD/DLY MOD/DLY
EQ MODULATION/DELAY
DIM/RESO DIM/RESO
DIMENSION/
EQ
RESONANCE
FLANGER FLANGER
DEPTH DEPTH
6.
Turn the dial to change the setting.
For details on the effect types that can be selected for each
effect module, and on the effect parameters of each type,
refer to the appendix (→ p. 145 – 153) at the end of this
manual.
7.
To switch the module On/Off setting, bring the
module onto the display and press the [ENTER]
key.
When the effect module has been set to Off, the effect type
name is shown as "-OFF-" on the display. If you press the
[ENTER] key once more in this condition, the setting is
returned to On.
FLANGER FLANGER
-OFF- -OFF-
N
OTE
If "TOTAL" is shown on the first line of the display, you can
adjust the ZNR/VOL PDL module setting and the patch level.
Switching the effect module On/Off is not possible in this
case.
8.
Repeat steps 3 - 7 to make the desired edits for
other modules.
TOTAL TOTAL
ZNR, VOL PDL, PAT LVL
TOTAL TOTAL
ZNR, VOL PDL, PAT LVL
TOTAL TOTAL
ZNR, VOL PDL, PAT LVL
TOTAL TOTAL
ZNR, VOL PDL, PAT LVL
TOTAL TOTAL
ZNR, VOL PDL, PAT LVL
2
Setting value
ZOOM MRS-802