Combining Multiple Tracks Into 1-2 Tracks (Bouncing) - Zoom R8 Operation Manual

Combining multiple tracks into 1–2 tracks (bouncing)
Bounce to mix and record multiple tracks as 1–2 tracks. This is also called "ping-pong recording."
Bounce destination track settings
PROJECT > REC > BOUNCE TR
Start from the Top Screen
1
Press
2 Select
REC
3 Select
BOUNCE TR
To include the bounce destination track
4 Select
Play
BOUNCE TR: bounce destination track
Setting
Mute Mute the bounce destination track (default)
Play Play and record the bounce destination track
5
Return to the start of the project.
34
.
Change menu
Press
.
Change menu
.
Change
setting
Bouncing (preparation)
1 Select the bounce source tracks
(set each track to play back).
Press 1–2 times until
indicator lights green
Lit green: ready to PLAY
2
Select bounce destination track(s).
Press 1–2 times until
indicator lights red
Lit red: ready to record
HINT
● Bouncing creates a new file in the same
project.
● If you set the bounce destination to a mono
track, the recorded signals are mixed to
mono. If set to a stereo linked pair of tracks,
the recorded signals will be mixed to stereo.
● You can also include signals input through
the INPUT jacks when bouncing.
● For information about adjusting sounds
and using effects while bouncing, refer to
"Mixing" on P .40.