Table of Contents
Advertisement
If some error occurs when the power is turned on or during program execution, one
of the following error messages will appear on the LCD.
Error Messages
System Program error
Problem
A System Program error has occurred.
Solution
Contact your system administrator.
Low battery warning
Problem
When the BHT is turned on or off or during
execution of program, the battery output level has
dropped below a specified lower limit.
If low battery is detected, the BHT displays
this message for approx. 2 seconds and
beeps three times (for 0.1 second per beep).
After that, it will resume previous regular
operation.
Solution
The battery cartridge will need to be recharged
before long. Replace or recharge the battery
cartridge.
If the grip style BHT is loaded with battery
cartridges both in the BHT body and the grip,
replace or recharge both battery cartridges. Always
remove both battery cartridges, even if you only
have
one
fully-charged
cartridge on hand.
replacement
battery
33
Advertisement
Table of Contents
