Service (Service) Submenu; Setting The Multitest (Multitest) Parameter - DURKOPP ADLER 878-M PREMIUM Service Instructions Manual

17.7 Service (Service) submenu

Determine the technical settings here so that the machine runs without
any problems. The parameters are explained in more detail in the
subchapters.
The menu is divided into the following submenus:
Parameter
Multi-test
Adjustments
Calibration
FootZeroHeight

17.7.1 Setting the Multitest (Multitest) parameter

This parameter makes it possible to test whether, for example, the mag-
nets, drives, and inputs or outputs are functioning correctly.  Parameter
list 878-M PREMIUM lists the necessary allocations.
Subitem
Test Output
Test PWM
Test Input
Test Ana.Input
Test Auto Input
Test Sew. Motor
Test Step. Motor
Test Pedal
Test Fabric Sen
Test Output subitem
Test of the outputs according to the interconnection diagram.
To test the outputs:
1. Select the desired output with the
Fig. 59: Test Output subitem
2. Press the OK button to activate/deactivate the selected output.
90
Explanation
Multi-test
Service routine
Calibration
Setting the gap between the foot and the
feed dog
Explanation
Test of the outputs
Test of the pulse width modulation
Test of the inputs
Test of the analog inputs
Test of the inputs
Test of the sewing motor
Test of the stepper motors
Test of the analog pedal
Test of the material thickness detection (sensing)  p. 94
/
Value :
Output :
Service Instructions 878-M PREMIUM - 03.0 - 10/2019
Programming
Reference
 p. 90
 p. 94
 p. 94
 p. 96
Reference
 p. 90
 p. 91
 p. 91
 p. 92
 p. 92
 p. 92
 p. 93
 p. 94
buttons.
22
ON(1)