Table of Contents
Advertisement
Setting the winder run
Fig. 40: Setting the winder (4)
(8) - Block
(10) - Winder wheel
(12) - Threaded pin
13. Loosen the threaded pin (13).
14. Set the switch cam (14) such that it rests against the leaf spring (15)
15. Set the switch cam (14) such that the winder lever (3) has no axial play.
16. Tighten the threaded pin (13).
Installing the winder
Fig. 41: Setting the winder (5)
(1) - Screws
17. Place the winder on the machine arm.
18. Tighten the screws (1).
50
⑧
⑩
⑫
⑬
when the block (8) has engaged in the locking disk.
①
⑭
(13) - Threaded pin
(14) - Switch cam
(15) - Leaf spring
Service Instructions 878-M PREMIUM - 03.0 - 10/2019
Winder
⑭
⑮
Advertisement
Table of Contents
