Integrated motor
16.1.2 Removing the cover
Fig. 51: Removing the cover
(1) - Screws
(2) - Cover
1. Loosen all 5 screws (1).
2. Remove the cover (2) in the direction of the handwheel axis.
16.1.3 Removing the motor
Fig. 52: Removing the motor
(1) - Screws
3. Loosen the screws (1) and disconnect the cables from the motor.
4. Loosen the 3 screws (2) on the motor flange.
5. Remove the motor from the machine as indicated by the arrow.
Service Instructions 878-M PREMIUM - 03.0 - 10/2019
①
②
①
①
(3) - Washer
②
(2) - Screws
③
61