Fig. 71: Data loss warning message
6. To cancel, press the ESC button; to continue, press the OK button.
The data transfer begins and a message appears, stating that the
Fig. 72: USB key warning
The message disappears after the data transfer.
17.11.3 Setting the Programs (Programs) parameter
It is possible to transfer all or just specific programs to the USB key or the
control.
To transfer the programs:
1. Plug the USB key into the socket (1) on the control (2).
100
Erase USB-Stick
All Data will lost
USB key must not be removed.
Don´t remove USB!
OK
ESC
Please Wait!
Service Instructions 878-M PREMIUM - 03.0 - 10/2019
Programming
+
+