Assembling The Cover - DURKOPP ADLER 878-M PREMIUM Service Instructions Manual

Assembling the motor
1. Insert the motor into the toothed belt wheel of the upper shaft.
2. Tighten the 3 screws (2) on the motor flange.
3. Tighten the screws (1).
Important
The first row of the screws (1) on the toothed belt wheel in the direction of
rotation should be tightened up to the surfaces of the shaft.

16.1.4 Assembling the cover

Fig. 53: Assembling the cover
(1) - Screws
1. Place the cover (2).
2. Tighten the screws (1).
62
①
②
①
(2) - Cover
Service Instructions 878-M PREMIUM - 03.0 - 10/2019
Integrated motor